Truck Crane
Truck Crane
Features:
Strong structure, excellent performance
1. 41m large cross-section boom, high-strength steel plate, compact head + single-plate head, lifting performance in the strength area is improved by 7%;
2. Double triangle structure turntable, high-strength,stable rotation, turntable deformation is reduced by 10% under the same lifting condition;
3. Large-section rectangular frame, large span of movable legs, better lifting stability;
4. Φ17 lifting wire rope, single rope has greater tension, more durability, and longer service life.
Good control performance
1. 125mL large displacement high-pressure variable pump, high working efficiency, good combined action, high reliability;
2. The variable amplitude adopts self-compensation deadweight lowering technology, which is fast with light load, stable with heavy load, and precise and controllable;
3. The high-performance winch balance valve is adopted, and the minimum stable speed can reach 1m/min, which can achieve millimeter-level precise lifting.
Safe, intelligent and comfortable
1. Adopting a full-range on-board information platform, it realizes three-dimensional monitoring of equipment operation and real-time control is at your fingertips;
2. A new generation of 7-inch colorful touch screen torque limiter with daytime + nighttime display mode, which is non-reflective and non-glare. The remaining amplitude indicates the current safe range of the lifting weight, making the operation safer;
3. The upper cab has a good field of view, a side-mounted integrated instrument panel, does not occupy the operator's space, can push and pull side windows, has good air permeability, and is equipped with an electric fan as standard, which is more comfortable;
4. Two types of chassis cabs are optional, both of which are equipped with sleeper berths as standard. The medium-duty truck cab is mature and reliable; the 4.0A cab is stable and spacious.
Economical, fuel-efficient, energy-saving and environmentally friendly
1. Yuchai 6-liter engine + 9-speed synchronous gearbox + efficient transmission system layout, fuel consumption per 100 kilometers is 26L, 10% lower than competitors;
2. Variable pump + IECO energy-saving module + 3.0 integrated valve, operating fuel consumption is 2.6L/h, 26% lower than competitors;
3. IECO energy-saving module, according to the operation requirements, accurately controls the output, low fuel consumption, more environmentally friendly and energy-saving.
Strong environmental adaptability
1. Class G vehicles, approach angle 19°, departure angle 13°, stronger trafficability to construction sites;
2. Equipped with a 9-speed gearbox, maximum climbing grade 43%, stronger driving ability on construction sites;
3. Adjustable operating idle speed to meet the needs of operations at different altitudes and different customer habits;
4. Standard air conditioning for upper cab and lower cab, no fear of severe cold or heat.
Specifications and status:
|
Truck Crane |
|||||
|
Project |
ZTC250A562-3
|
ZTC250A562-3.1
|
Remarks |
||
|
Working performance |
Max. rated lifting capacity (kg) |
25000 |
|||
|
Max. lifting moment of basic arm(kN.m) |
1098 |
||||
|
Max. lifting moment of longest main arm(kN.m) |
734 |
||||
|
Max. lifting height of basic arm(m) |
10.3 |
||||
|
Max. lifting height of main arm(m) |
41.3 |
No consideration of boom deformation |
|||
|
Max. lifting height of jib(m) |
49.5 |
||||
|
Working speed |
Single rope maximum speed (main winch)(m/min) |
125 |
The fourth floor |
||
|
Single rope maximum speed (auxiliary winch) (m/min) |
125 |
The fourth floor |
|||
|
Boom raising/lowering time(s) |
33/80 |
||||
|
Boom extension/retraction time(s) |
75/80 |
||||
|
Outrigger retraction/release time (horizontal) (s) |
20/28 |
||||
|
Outrigger retraction/release time (vertical) (s) |
20/28 |
||||
|
Slewing speed(r/min) |
0~2.8 |
||||
|
Driving parameters |
Max. operating altitude(m) |
2000 |
|||
|
Max. driving speed(km/h) |
85 |
||||
|
Max. climbing grade(%) |
43 |
||||
|
Min. turning diameter(m) |
20.5 |
||||
|
Approach angle(°) |
19 |
||||
|
Departure angle(°) |
13 |
||||
|
Min. ground clearance(mm) |
250 |
||||
|
Fuel consumption per 100 kilometers(L) |
26 |
||||
|
Mass parameters |
Driving state deadweight (total mass)(kg) |
31200 |
|||
|
Vehicle curb weight(kg) |
31070 |
||||
|
Front axle load(kg) |
6350 |
||||
|
Rear axle load(kg) |
24850 |
||||
|
Dimensional parameters |
Overall dimensions (L x W x H)(mm) |
12750×2550×3700 |
12750×2550×3620 |
||
|
Longitudinal distance of outriggers(m) |
5.53 |
||||
|
Horizontal distance of outriggers(m) |
Full extension6.4,Half extension4.36 |
||||
|
Tail turning radius(mm) |
3420 |
||||
|
Main arm length(m) |
10.5~41.0 |
||||
|
Main arm elevation angle(°) |
-2~80 |
||||
|
Jib arm length(m) |
8.5 |
||||
|
Jib arm installation angle(°) |
0,15,30 |
||||
|
Chassis engine |
Model |
YCS06270-61 |
|||
|
Rated power/speed(kW/r/min) |
199/2300 |
||||
|
Max. output torque(N.m/r/min) |
1050/(1200~1700) |
||||
|
Manufacturer |
Guangxi Yuchai Machinery Co., Ltd. |
||||
|
Model |
ZLJ5330JQZA6(ZTC250A562-3) |
ZLJ5331JQZA6(ZTC250A562-3.1) |
|||
|
Exhaust pollutant emission values and smoke limit values |
Comply with GB3847-2018, GB17691-2018 (Euro 6) |
||||
|
Manufacturer |
Zoomlion |
||||
We deliver the new Truck Crane, the price as following:
FOB Shanghai, China XX,000$
DAP Khorgos,China XX,000$
Status:Brand new
Delivery time: As fast as you want,very short.
Hot Tags: truck crane,ZOOMLION,25tons,Yuchai,quotation,price,for sales,customized, 12 m Concrete Mixer Truck, 6x6 Articulated Dump Truck, 75m Concrete Pump Truck, Compact Excavator with Zero Tail Swing, Compact Mobile Crusher, Tracked Mobile Scalper
Previous
Truck Mounted Hydraulic CraneNext
No InformationYou Might Also Like
Send Inquiry