Working Conditions And Safety Regulations (2)
1.5 Description of working and safety indications
1. No standing under boom.
2. Prohibit boom lifting load.
3. Prohibit extending into hopper during working.
4. Never touch moving or hot parts.
5. Prohibit opening water tank cover during pumping.
6. Prohibit approaching outlet during pumping.
7. Prohibit opening discharging door during pumping.
8. Indication of being careful of outrigger cylinder injuring your foot.
9. Prohibit opening coupling during pumping.
10. Prohibit opening pipe before releasing pressure.
11. Nothing is permitted to be added to end hose, and safety chain should be locked.
12. Prohibit operator working under boom.
13.Max. inclination during machine operation.
14. Indication that nobody is permitted in outrigger working area.
15. Prohibit welding when power supply is connected.
16. Prohibit touching moving parts.
17. Being careful of spraying material into your eyes.
18. Don't put end hose into concrete.
19. Max. length limit of end hose.
20. Dangerous indication of electric wire with high voltage.
21. Outrigger supporting force indication.
22. Indication of adding water point.
23. Indication of adding hydraulic oil point.
24.Wear safety helmet.
25. Indication of lifting point.
26. Indication of slewing remote control.
27. PTO gear indication.
28. Indication of releasing water.
29. Indication of hydraulic oil level.
30. Changeover switch of panel control or off and remote control.
31. Engine stop button.
32. Alarm indicator.
33. Pump displacement adjustment.
34. Deceleration or acceleration button.
35. Lubrication oil pump switch.
36. Cooling fan switch.
37. Pumping or stop or reverse pumping switch.
38. Switch of concrete cylinder inching.
39. Switch of distribution valve inching.
40. Mixing reversely/stop/mixing switch.
41.Water pump working/stop.
42. Boom slewing indication.
43. Indication of each boom up and down.
44. Indication of outrigger swinging.
45. Indication of outrigger extending and retracting horizontally.
46. Indication of outrigger rising and lowering vertically.
1.6 Position of main safety indications
